Schematic capture
D2CAD What's New Manual History Download

The local rule at the time of parts creation

Please create parts along with the rule written here as much as possible.
I ask cooperation of you so that many men and parts can be shared as much as possible.
It performs not being written here freely fundamentally.
It is kind if you ask a question to the mail in being uneasy.

Important
When you register and edit parts into a library file, please take the copy of an original file and edit there.
An original library file may be changed by upgrade and an overwrite copy may be carried out.

If showy, it will do so. It does so as showy. It is absolute.

Parts name (NAME)

A parts name is an indispensable item at a parts name.

Character height 70 or 65 grids This is the setup when inputting NAME to a character input.
Japanese Let's be made to avoid as much as possible. Since the man who is using the English version abroad is also
Font Standard (font specification is not carried out) This is the setup when inputting NAME to a character input.
Printing character Standard (printing is specified) This is the setup when inputting NAME to a character input.
Prohibition character as for a comma, the parts table creation CSV file is using the comma pause file -- it cannot be used
Prohibition character There is form which uses a parts name in netlist form. []-(), $ Let's avoid which sign.
Prohibition character Include "D2CAD" or "D2 CAD" character sequence is use prohibition. It is used by the inside processing of a program.

Reference number (REF)

A reference number is attached to the parts which needs an output in a parts table.
Isn't it required for a power supply and GND?

Character height 70 or 65 grids This is the setup when inputting REF to a character input.
Japanese Since you may stop using it by network output processing, please do not use it.
Starting point position When parts number automatic allotment is carried out, let's make it a setup from which the length of a character sequence may change.
This is the setup when inputting REF to a character input.
Font a standard (font specification is not carried out) -- this is the setup when inputting REF to a character input
Printing character a standard (printing is specified) -- this is the setup when inputting REF to a character input
Prohibition character as for a comma, the parts table creation CSV file is using the comma pause file -- it cannot be used
Prohibition character In netlist form [] (), - A $ Which sign cannot be used.
Package When two or more parts are in one parts, such as TTL, Please attach a child number in the order of A, B, and C like U?A U?B.
It will plan this to be automatic and to attach it by the program.

Value (VAL)

Value is used for what value differs from by the same parts names, such as a capacitor and resistance.
Probably what is necessary is just to think that it is used when parts are specified from parts name + value, when creating a parts table.
Without using value, it may be separately specified as the object for 100ohm, and the object for 200ohm, and you may register with a parts name. ^^;

Character height 70 or 65 grids This is the setup when inputting VAL to a character input.
Japanese Although it can be used, please avoid as much as possible.
Starting point position When parts number automatic allotment is carried out, let's make it a setup from which the length of a character sequence may change.
This is the setup when inputting VAL to a character input.
Font Standard (font specification is not carried out) This is the setup when inputting VAL to a character input.
Printing character Standard (printing is specified)
Prohibition character as for a comma, the parts table creation CSV file is using the comma pause file -- it cannot be used

Pin

Probably what is necessary is just to keep that it does not use a sign fundamentally in mind, since a pin name and a pin number are concerned with a netlist.

Pin length The point of the outside of a pin is made to be on a grid 100.
Character height A program standard value is used.
Japanese It considers as use prohibition.
Font Standard (printing is specified)
Printing character Standard (printing is specified)
Prohibition character In netlist form [](), - A $ Which sign cannot be used.

A line, a circle

It is the element which determines the form of parts.
Although there is especially no restriction, if possible, please use a solid line.
As for the line of the style the outside of it, the thickness of a line may be changed in the future.

Character

It is possible to embed a character into parts. + It is convenient if it is used for a sign, the sign by the side of No. 1, etc.

Character height There is especially no restriction.
Japanese Although it can be used, please avoid as much as possible. Please input a sign etc. in half size.
Font Standard (font specification is not carried out)
Printing character Standard (printing is specified)
Prohibition character Include "D2CAD" or "D2 CAD" character sequence is use prohibition. It is used by the inside processing of a program.

A package and a package total

When you parts-ize, please be fully careful and input.
When there is no concept of packages, such as resistance and a capacitor, it is O.K. with 0.
Please be not referred to as 1.0 and 1 may be distinguished in the future.

Others

If it is made to register after deciding whether to display a parts name, value, etc., before registering with a library file, the work after a parts input will become easy.
When using value, let's register the value used well as initial value.


Schematic Editor D2CAD
- Copyright © 1996-2006 YAN -
E-Mail support@yansoft.com
This page is translated with translation software from Japanese.